Product Information

Automatic forming machine

1、 Description

The full-automatic horizontal boxless parking forming machine adopts PLC control, which is stable and reliable, and can realize automatic operation. It is simple and convenient to operate, covers a small area, and has high productivity. It is suitable for the production of cylinder head, flywheel housing and other auto parts, brake caliper, etc. It is also applicable to the production of pipe, valve, shaft, cover plate parts, such as tee, elbow, pipe clamp, etc. It is the most popular molding equipment in foundry.

2. technical parameters

3、 Main technical features

The moulding machine adopts double-sided formwork, with strength of boiling water and sand; The sand hardness is uniform, the box precision is high, and the thickness of the sand box is adjustable; Convenient formwork replacement; Hydraulic oil temperature control to ensure the best operation of the equipment; The machine is easy to operate, with double safety protection, visible sand mold and humanized operation procedure. Effectively improve productivity.

Product prototype based on New Oriental fndx model in Japan. In 2010, fndx entered the Chinese market. It was refitted on this model to produce z42 series automatic molding machine for the Chinese market. The sand shooting was ventilated along the Japanese new plate, and the air boiling sand was added to ensure the filling effect of the sand chamber. At the same time, two independent sand shooting devices were developed for the large model to realize sand injection in the warehouse. Pneumatic and hydraulic pressure is used to enter the hydraulic station for compaction, so the compaction degree is greater and the sand strength is higher. It is more convenient to adjust the thickness of the sand layer. The oil temperature of the hydraulic station is cooled by air conditioning. The oil temperature is controlled. The time for replacing the formwork shall not exceed 5 minutes. Template heating device, heating device on platen, replacement of release agent to reduce operation cost, double safety, visualization of sand conditions and humanized operation procedures. Effectively improve productivity.

Z42 advantages:

1. improve production efficiency and save human resources.

90mold/h capacity.

Horizontal parting boxless automatic forming machine.

Equivalent to 5 extruders +5 people.

2. Implement quality improvement and stability

Reduce parting and improve parting accuracy

With high rigid guide rod support

It is supported by four high rigid guide rods to realize high-precision parting and mold closing.

The maximum extrusion pressure is 0.9mpa to improve the die quality.

3. reduce operating costs, save energy and improve the environment

Reduce the use of sand

Reduce flying sand and loose sand

The box body is closed up and down and shaped at the same time

Z42 features:

1. horizontal parting, easy to lower the core.

2. mold height can be adjusted to save sand.

3. intelligent control, no need for professionals, simple and fast operation.

4. it can be a production line or a single machine.

5. safety light switch to ensure absolute safety under the core process.

6. efficient and stable, 24-hour operation, providing continuous productivity.

7. it can make complex castings.

8. touch screen, parameter modification, immediately visible.

9. hydraulic power, stable operation and high compactness.

10. the sandbox is provided with exhaust holes.

11. the angle of sand valve is adjustable.