Simple and convenient to install, with high reutilization rate. Suitable for pump lifting oil well. It has the advantages of low price, simple to use and various operations.
Brand ERUI
Certification
Lead Time 80days
Guarantee Period 12months
Source of Supply Shandong
Payment Method T/T L/C
Product Introduction
The continuous heating cable put into the tubing from the wellhead to heat and magnetize the crude oil in the tubing,which is similar to "hot fast", simple and convenient in installation, high reutilization rate, and suitable for oil wells lifted by rodless pump.
Product Advantages
1 Widely applicable and low cost; any rodless oil production wells can be used without being affected by well conditions and fluid. Moreover, the whole set only has cable and control cabinet, so the investment cost is low.
2 Simple installation and disassembly, one device for many wells; Only need to install and disassemble the cable through cable rack intstead of removing tubing, the operation time is very short, and a set of units can be circulated between the wells.
3 The heating time can be set according to the heating requirements, especially the waxing well can be set to automatically heat according to the current change.
Product Parameters
1 Output oscillation frequency: 50Hz.
2 Heating efficiency: ≥95%.
3 Ability to store working logs for 3 years of continuous operation.
4 Support local LCD panel operation and remote control, can realize remote startup and shutdown.
5 Support intermittent heating function, can automatically start and stop the heating system according to the set time.
6 Applicable well conditions: Oil well produced by rodless pump or water well.
Item |
Parameter Index |
Unit |
Remark |
Withstand Voltage |
6000 |
V |
AC |
Conductor Sectional Area |
3*8.04 |
mm² |
|
Pressure Resistance |
20 |
MPa |
|
Length |
<3000 |
m |
Customized according to well condition |
Designed Temperature |
200 |
℃ |
Maximum |
Strength of Extension |
40 |
Kg/mm² |
Customized according to length |
Power |
20 |
800m |
Working temperature50-70℃ |
Recommendations
3/8" Dr. 6pt Deep Socket
BrandENDURA
Drilling Line∣6*26WS-IWRC-EEIP-sZ, Lubricated, Uncoated Finish
BrandJ&L
FKQ320-5 Remote Control Device of Ground Blowout Preventer
BrandSHENKAI
2"NPS Butt Welded Straight Cross
BrandYSDLGJ
1/4"Dr. Double End Bits
BrandENDURA
Suction Pump Accessories-Fixed Valve Cover
BrandBAOSHI
28pcs. Thread Taps Set
BrandENDURA
TSC HMC Series Mud Cleaner | HMC250x2/100x12, HMC250x3/100x16
BrandTSC
Worm Shaft, P/N:TWPX250-10 | Agitator HA-18.5 Gear Box Parts
BrandTSC
2FZ18-U Double-ram Blowout Preventer
BrandZHONGZHONG
3-1/2"NPS Butt Welded Equal-diameter Tee
BrandYSDLGJ
20-125RWBM Rod Pump
BrandFUQIAO
3/8" Dr. 6PT. Socket
BrandENDURA
Cast Steel Lift Check Valve
BrandCD
1/2 In. L-handle
BrandSHEFFIELD
8pcs. Folding Torx Key Set
BrandENDURA
20-175RHBM Rod Pump
BrandFUQIAO
20-106RHBC Rod Pump
BrandFUQIAO