Continuous Gem Bearing Flow Meter
Brand WELL-SUN
Certification N/A
1. The mechanical body of gem bearing flow meter adopts gem as the support for both ends of the turbine shaft, reducing start displacement, and improving sensitivity of the instrument. One characteristics of the instrument is firm and durable, it is because the housing design provides sound protection for turbine. The instrument adapts to different well deviations. 2. Applied in: Water injection profile logging, operating in sand control net/sand control liner, high velocity wells, and output profile logging.
Technical Parameters:
1. Temperature: 175℃ (350℉) 2. Pressure: 15000psi (103MPa). 3. Output: 10 pulses/revolution, directed. 4. Start valve value: Water: 1.67m/min (5.5ft/min). Light oil: 1.82m/min (6.0ft/min). Heavy oil: 3.04m/min (10ft/min). Air: 4.72m/min (15.5ft/min). 5. Max. flow rate: 609.6m/min (2000 ft/min)
Recommendations
Three-square File 10"
BrandENDURA
KCP52 Coalbed Methane Supercharging and Expansion Compressor
BrandKERUI
QYZ Hydraulic Drilling Jar
BrandSHUANGJIA
BOMCO F-500 Mud Pump Fluid End Accessories_Inch
BrandKERUI
Suction Pump Accessories-pump Barrel Closed Valve Cover
BrandBAOSHI
Drilling Line∣6*19S-IWRC-IPS-sZ, Lubricated, Uncoated Finish
BrandJ&L
27x36mm Rectangular Ring End Fitting
BrandENDURA
20-175RHBM Rod Pump
BrandFUQIAO
Rotary Cultivator Of Small Sized Gearbox Series
BrandDAHUA
Cast Steel Lift Check Valve
BrandCD
8pcs. Folding Torx Key Set
BrandENDURA
FKQ320-5 Remote Control Device of Ground Blowout Preventer
BrandSHENKAI
Double Flap Swing Check Valve
BrandCD
3"NPS Butt Welded Equal-diameter Tee
BrandYSDLGJ
Suction Pump Accessories-valve Cover
BrandBAOSHI
32 Pc Tool Set
BrandSHEFFIELD
Rotating Shaft Assembly, P/N: HNJ4-02 | Agitator HA-4
BrandTSC
Upper/ Lower Impeller Assembly, P/N: HNJ7.5-04, HNJ7.5-07-2 | Agitator HA-7.5/HA7.5-2
BrandTSC