Product Information

1.FM-LOE converter adopts internationally advanced single chip microcontroller (MCU) and surface-mount technology, with reliable performance, high precision, low consumption, and stable zero pint. Dot matrix Chinese LCD display, indicate accumulated flow rate, velocity, flow in percentage etc parameter. 2.FM-LDE type electromagnetic flow meter (with battery for power supply) can continue working over 3 years, if having special requirement, can also realize 3.6V lithium battery and 220V AC or 24V DC power supply. 3.Adopt grounding electrode structure, form a balanced electrode cross-section, to guarantee the whole measuring process carried on under the limit of balanced electrode cross-section, to eliminate electrical noise disturbance and assure measuring precision. 4.Low frequency rectangular wave excitation enhances measuring stability under the condition of flow evolution and torsion, with the advantage of low power loss and velocity. 5.Bi-directional measurement system, for positive flow and reverse flow. 6.Measuring tubing inside has no movable components, easy for maintenance, so sensor service life is long, no flow choking components, no pressure loss. 7.High accuracy, normally ±0.5%, ± 0.3%, ± 0.2%, ±2.5% (insert-type) 8.With RS-485 wire transmission and GPRS wireless remote transmission function. 9.Electromagnetic current range in sensor is very large, the same electromagnetic flowmeter range could reach 50:1. In addition, electromagnetic flowmeter just in direct proportion with the measured medium average velocity, and has no relation with flow condition of axially symmetrical distribution(laminar flow or turbulent flow).

Technical Parameters:

1.Measured fluid：conducting liquid, serous fluid. 2.Measuring precision：piping type± 0.5%, ± 0.3%, ± 0.2% 3.Repeatability: piping type；0.17%，0.1%，0.07% 4.Rated pressure: 1.0MPa, 1.6MPa, 4.0MPa 5.Special pressure: customizable 6.Medium temperature: E grade, 0-60℃; 7.Electrode type: standard fixed type 8.Sensor type: piping type electromagnetic flowmeter 9.Diameter: piping flange type DNlO - DN3000 10. Structural material: electrode: 316L, lead(pt), hastealloy(HB, HC), tantalum(Ta), titanium (Ti), wolfram carbide(WC); inner liner: CR chloroprene rubber PU Polychloro-ester rubber, F4 (PTFE) 、 F46(FEP)、 PFA, KCB (specialcustom-made high-temperature inner liner); measuring tubing: stainless steel Flange: carbon steel (conventional）， stainless steel (optional) meter body: carbon steel (conventional), stainless steel (optional) meter head pressed film casting aluminum. Power supply：3.6V conical battery for power supply 3.6V hammer battery and 24V DC double power supply 3.6V and 220V double power supply Electrical interface: Ml6Xl.5 IP rate: IP68 Electrode plate: 2-6 Flow direction: positive and reverse Ambient temperature:-25 - 50°C Storage temperature: -40 - 60°C Relative humidity: 5 - 90% Alarm: Atc alarm, excitation