Explosion-proof LED Spotlight
Brand OKTECH
                    Certification
                                        
                                                            
                                                        
Lead Time 15days
Guarantee Period 12months
Source of Supply Guangdong
Payment Method T/T L/C
Advantages: 1. The products' shells use nA-type explosion-proof structure, which can be used safely in explosion-proof zone 2. 2. It uses imported LED light source of internationally renowned manufacturers, with high luminous efficiency, long service life. 3. Optimize the light distribution design, and light color temperature has warm white and cool white to be optional. 4. Ultra-thin design, the whole light is about 11Kg, one person complete the installation and wiring alone can be achieved. 5. High degree of protection, up to IP66, and excellent anti-corrosion properties; 6. Light source and driving cabin are apart, which can control tropical island effect effectively, and reduce the LED and drive temperature to prolong the lamp life. 7. Be equipped with U-shaped bracket, a variety of installation methods can be achieved, such as seat, sidewall and ceiling. Applicable scope Widely used in the field of outfield in oil field station, gas gathering station, lighting in outside drilling room, and additional lighting of installation.
Technical Parameters:
1. Certification: ① Obtained: Conformity Certificate of Explosion-proof; ② Certificate No.: CE16.1363; ③ Certification mark: Ex nR mb IIC T3 Gc; Ex tD A21 IP66 T195℃; 2. Material: ① Main body: High-tech sprayed alloy; ② Transparent part: Tempered glass; 3. Light bulb ① Brand: OSRAM; ② Power: 200W, 400W; ③ Type: LED; ④ Life: 50000h. 4. Rated voltage: 220V ~ 50Hz; 5. Insulation class: Class I; 6. Protection class: IP66; 7. Ambient temperature: -20 ℃ to +40 ℃; 8. The introduction of cable diameter: Φ8mm ~ Φ14mm; 9. Anticorrosion grade: WF2; 10. Based on the users' requirements, use professional lighting software to simulate site luminosity data and provide illumination solution.
Recommendations
                    Power Tong Accessories | Die, P/N: 01.01-27MC | ZQ203-100
BrandRUSHI
                    Drilling Line∣6*19S-IWRC-EEIP-sZ, Lubricated, Uncoated Finish
BrandJ&L
                    5000PSI, 2-1/16 '' Christmas Tree
BrandLIWEN
Rotating Shaft Assembly, P/N: HNJ5.5-02 | Agitator HA-5.5
BrandTSC
                    Suction Pump Accessories-internal Thread Plunger Connector
BrandBAOSHI
RS78.100-12A Stem
BrandRUSHI
                    Hoisting Tools | “Y” Series Slip Type Casing Elevator|HYC Type 200 STON|3-1/2~7-5/8 IN
BrandRUTONG
                    20-125RWBC Rod Pump
BrandFUQIAO
                    F18-105 S-shaped Single Ram Blowout Preventer
BrandSHENKAI
                    5/16"Dr. 30L Phillips Bits
BrandENDURA
                    2000PSI FF Water Injection Wellhead
BrandLIWEN
                    5000PSI AA PCP Wellhead
BrandLIWEN
                    Replaceable Urethane Pistons|Sizes in inches|With Piston Bore 1-1/2 in
BrandKERUI
                    13pc. Engineering Drills Set
BrandENDURA
                    13pcs. Engineering Drills Set
BrandENDURA
                    FH54-35 Annular Blowout Preventer
BrandSHENKAI
                    N95 Dust Mask with Filter
BrandKANGSHIELD
                    Corrosion Inhibitor
BrandDFHG