Flange connection type balance flowmeter
Brand HENGHE
Certification N/A
The FM-BKD balance flowmeter (also known as multi-hole orifice) is a new type of throttling flow sensor researched and developed according to national standard GB2624 based on orifice plate and flow regulator. The multi-hole orifice is used to installed at the downstream of various disturbances, so as to provide excellent performance with the shortest straight pipe section laying. Characteristics: 1. High measurement precision 2. The straight pipe section needs to be short 3. Wide range ratio 4. Low permanent pressure loss 5. Dirt resistant and uneasy to block 6. Wide application scope 7. The integrated structure is easy to use
Technical Parameters:
1. Pipe size: DN15-1200mm 2. Nominal pressure: PN≤42MPa 3. Working temperature: -50℃-550℃ 4. Range ratio: 1:10, 1:15 5. Precision level: Level 0.5, level 1 and level 1.5 6. Connection method: Flange connection, welding and threaded connection
Recommendations
Torx Screwdriver
BrandENDURA
Piston Nut, P/N: 1133856 |MP-5/MP8/MP10/MP13/MP16
BrandKERUI
Welding Clamp Locking Pliers
BrandENDURA
Replaceable Urethane Pistons|Sizes in Millimeters|With Piston Bore 42mm
BrandKERUI
13pcs. Engineering Drills Set
BrandENDURA
3000PSI 1-13/16'' CC Christmas Tree
BrandLIWEN
Suction Pump Accessories-internal Thread Plunger Connector
BrandPYZS
1/2 In. Extension Bar
BrandSHEFFIELD
Oil Seal of Input Shaft, 95x130x12 | Agitator HA-18.5
BrandTSC
3000PSI 1-13/16'' AA Christmas Tree
BrandLIWEN
Power Tong | Casing Power Tong|TQ178-16|4~7
BrandRUSHI
Sector Acoustic Logging Instrument
BrandWELL-SUN
Cast Steel Lift Check Valve
BrandCD
Pump Accessories-pump Barrel Valve Cover Reducer
BrandBAOSHI
Diamond File
BrandENDURA
Hoisting Tools | “Y” Series Slip Type Casing Elevator|HYC Type 200 STON|3-1/2~7-5/8 IN
BrandRUTONG
12.5mm Speeder Handle
BrandSHEFFIELD
2"NPS Butt Welded Straight Cross
BrandRUNYANG