Head Hood compressed air line system
Brand KANGSHIELD
Certification N/A
Lead Time 30days
Guarantee Period 6months
Source of Supply Shandong
Payment Method T/T L/C
1. Hood: using DuPont Tyvek ® material is made;Anti-splash hoods and hoods;Joint airflow seal;Large size is suitable for use by people with beards or eye masks;The lens is a clear 15mil polyester (PETG) material;Panoramic undistorted. 2. Corrugated breathing tube:Located at the back of the hood, it has no effect on the work;Flexible lightweight corrugated materials to increase comfort and reduce fatigue; The OBAC is fast connected to the plug, large in diameter and extremely small in air. 3. Pump:The type is the oilless rotary leaf;Leaf blade is carbon structure;The intake filter is 40.0 micron copper/steel, 50 micron filtering felt materials with metal grid inlet filter housing;The exhaust filter is 0.3 micron HEPA;The pressure gauge is 3.8 cm dial, steel shell;The working pressure was 2-12 psi (0.14-0.83 bar) (up to 15psi) (maximum 1.03 bar);Performance: 0-10 CFM (0-16.99 m3 / h) (3/4 horsepower). 4. Motor: 3/4 horsepower;The voltage is 230V ac, single phase;The required power supply is 7.4 A (3/4 horsepower). 5. Long tube: polyvinyl chloride, with reinforced polyester yarn weaving;- 20 ° F to 150 ° F (-28.8 ℃ to -65.5 ℃);Maximum pressure of 185 psi @ 70 ° F (12.6 bar @ 21.1 ℃). 6. Belt parts: flat nylon adjustable belt;Plastic clips to avoid hoses covering the face. Scope of application: Is mainly suitable for fire control, chemical industry, shipbuilding, petroleum, metallurgy, mines, the place such as laboratory, firefighters or rescue and ambulance workers can be full of smoke, gas, steam or oxygen and securely under the bad environment of fire fighting and rescue and disaster relief and rescue work.
Technical Parameters:
1. Type: long tube respirator. 2. The head cover material: DuPont Tyvek ®, PETG lens. 3. Air breathing tube material: inner layer polyurethane, reinforced polyester yarn knitting, outer black polyvinyl chloride. 4. Air pump material: metal base and shell, brass and electroplated steel pipe, brass pressure reducing valve, steel handle, blue powder coating.
Recommendations
Oil Seal of Input Shaft, 50x80x12 | Agitator HA-2.2
BrandTSC
20000PSI, 4-1/16 '' Christmas Tree
BrandLIWEN
2000 PSI FF Electric Pump Wellhead
BrandLIWEN
5/16"Dr. 70L Slotted Bits
BrandENDURA
9.2 Tons Sprinkling Truck
BrandCLW
Power Tong | Casing Power Tong|TQ178-16|4~7
BrandRUSHI
Desulfurizer (Triazines)
BrandDFHG
5000PSI, 2-1/16 '' Christmas Tree
BrandLIWEN
F18-105 S-shaped Single Ram Blowout Preventer
BrandSHENKAI
3000PSI 1-13/16'' AA Christmas Tree
BrandLIWEN
Welding Clamp Locking Pliers
BrandENDURA
Rigid Vertical Bar Centralizer
BrandSHANGSHAN
F48-70 S-shaped Single Ram Blowout Preventer
BrandSHENKAI
Cast Steel Lift Check Valve
BrandCD
Suction Pump Accessories-pump Barrel Upper Joint
BrandPYZS
Replaceable Urethane Pistons|Sizes in Millimeters|With Piston Bore 42mm
BrandKERUI
12.5mm Speeder Handle
BrandSHEFFIELD
Grade T8 DX Shackle
BrandJ&L