JZLG41 Coiled Tubing Weight Indicator
Brand JPIM
Certification
Lead Time 30days
Guarantee Period 12months
Source of Supply Hubei
Payment Method T/T L/C
JZLG series coiled tubing weight indicator refers to a kind of instrument used to indicate the injector tubing load of the coil unit. It consists of sensor, coiled tubing, and weight indicator. The sensor is applied to measure the heavy and light loads of the injector tubing of the coil unit and transfer the pressure via the pipe to the weight indicator. There are two C-shaped spring tubes inside the machine and its two-pointer load indications respectively, correspond to the light and heavy pipe loads, while the spring tube senses the the pressure change and drives the magnifying mechanism to make pointer rotate indicating the load. Before use, install the sensor on the injector and the weight indicator in the operating room of the coil unit, and connect the weight indicator and the sensor through two 50-meter-long hoses.
Technical Parameters:
1. Accuracy: 1.5%F.S; 2. Temperature: -20℃-55℃; 3. Connecting pipeline: 50 m; 4. Heavy pipe load: 0-410 kN;54. Light pipe load: 0-205 kN; 6. Injector lever ratio: 4:1.
Recommendations
Bearing 16011, P/N: W21136011| LW450×1000-N
BrandXBSY
19pcs. VDE Insulated Tools Set
BrandENDURA
U Type 20/5-32/5t Double Beam Hook Gantry Crane
BrandWEIHUA
Wear-proof disk| LGF-1300 / LGF-1600
BrandKERUI
Overload Protection Device, P/N: X05310158| LW450×1000-N
BrandXBSY
Sand Blasting Equipment
BrandANTAI
VDE Insulated Lineman's Plier
BrandENDURA
Crosshead Pin, P/N: RS11309.04.011 | RS F-1300/RS F-1600
BrandKERUI
VDE Insulated Ratcheting Cable Cutters
BrandENDURA
16pcs. VDE Insulated Tools Set
BrandENDURA
FP Inside BOP Valve│ Standard Service
BrandSHUANGJIA
Tubing Head Housing
BrandLIWEN
Bolt, P/N: 1149771 |MP-5
BrandKERUI
Snap In Tire Valve Installer
BrandENDURA
Cyliner Head Plug, P/N: AH100101050500 |BOMCO F-800/ F-1000
BrandKERUI
Coupling Ø47.6X165, P/N: TS-250CP-02 | HCP/HCP-S Series Pump Parts
BrandTSC
Frame-Grease Lubricated, P/N: TS-20618-12-1 | HCP/HCP-S Series Pump Parts
BrandTSC
1/4" Dr.VDE Insulated Socket
BrandENDURA