HRSB Mud Pump｜10-P-130

Mud Pump｜10-P-130

Filter by Specs.

0 items can be selected...



Brand HRSB

Certification CU-TR/EAC API

Lead Time 60days

Guarantee Period 12months

Source of Supply Hebei

Payment Method T/T L/C

Product Information

DESCRIPTION：

The P series mud pumps are featured by its compact structure, small weight, and land use and high efficiency and can be equipped with drilling rigs according to the requirements and site conditions.

The P series mud pumps are durable and compact and can ensure stable operation. During shallow and middle to deep drilling, the P series mud pumps can meet the special requirements of users.

The durable fluid end of P series mud pumps significantly increases the performance of three-cylinder mud pumps. In addition, the independent structure is easy to inspect and maintain.

Features of Power end in P Series Mud Pumps

The base of the machine frame adopts one-piece welded structure and the seats of the main bearing and transmission bearing are made of one-piece cast steel. The whole pump has good stiffness and strength.
The crankshaft adopted a mosaic structure of alloy steel forge with full balance so that it operates very smoothly.
The pinion shaft is made of an integral structure and belt pulley or chain wheels may be installed on either or both sides of the shaft.
Roller bearings are installed at both ends of the shaft in order to improve the stability in operation and bearing capacity.
The gears and crossheads of the bearing are lubricated by splash methods.
The integral herringbone gear structure is adopted to ensure that the pump operates smoothly.
The extension rods are connected to the crossheads by pinholes, so as to ensure the concentricity of the pump. The packing adopts quad-layer sealing structure, which realizes good seal performance.

Features of Fluid end in P Series Mud Pumps：

The hydraulic cylinder is deployed in an L form so as to keep the liquid flow stable and to reduce vibration and pressure fluctuation.
The combined hydraulic cylinders are interchangeable and may be replaced individually.
The fast rotary valve cover is easy to remove and install. The cone bolts have a self-locking mechanism that helps to reduce vibration at the valve cover and to ensure the fastening and stability.
The piston rod and intermediate rod are jointed by clamps, which is easy to remove and replace.
The combined piston rod allows replacing of pistons without the need to disassemble the liners.

RONG SHENG MUD PUMP SERIES MODELS:

F Series	P Series	3NB Series	W Series	PAH Series	TEE Series	Mud Pump-Engine Packages
RS-F500	8-P-80	RS-3NB1300	W-440	PAH-350	TEE-300
RS-F800	9-P-100	RS-3NB1600	W-446
RS-F800FT	10-P-130		W-447
RS-QF800	12-P-160
RS-F1000	RS-P1600HL
RS-F1300
RS-F1300L
RS-F1300FT
RS-F1600
RS-QF1600
RS-F1600HL
RS-QF1600HL
RS-F1600FTL