PA-4067 Guide Rail Installation Analog Quantity Output Isolator (One-in One-out)
Brand Paragon
Certification N/A
PA-4067 is a kind of analog quantity signal isolator that can transmit 4-20mA signals of PLC and DCS to site to drive actuating mechanism at site. This kind of product is suitable for both the 35.5mm guide rail installation and baseboard installation, being compatible with MTL4546. Product features: 1. Power indicator lamp (green) 2. Input, output, and power supply complete isolation;
Technical Parameters:
1. Number of channels: one channel; 2. Power supply: 18-30VDC; 3. Consumption power: <2W; 4. Input signal: 4-20mA; 5. Output signal: 4-20mA; 6. Output impedance: 0-500Ω; 7. Response time: <0.05s (0-90%) (TYP); 8. Ripple: <10mVrms; 9. Transmission error: 0.1% final value; 10. Temperature coefficient: 50ppm/K measured value / 100Ω load; 11. Insulation resistance: over 100MΩ at 500VDC; 12. Isolation strength: 1500VAC/min; 13. Electromagnetic compatibility: meet the requirements of GB/T18268 industrial equipment application (equivalent to IEC61326-1); 14. Operating temperature: -10℃-+60℃; 15. Operating humidity: <90%RH (no condensate water); 16. Shell material: PC flame-resistant; 17. Weight: about 100g; 18. Boundary dimensions (thickness x width x height): 15x101x123mm.
Recommendations
25-225THM Tubing Pump
BrandFUQIAO
Grip Tools | Insert Used for DC-S, DCS-R And DCS-L Drill Collar Slips
BrandRUTONG
Grade T8 DX Shackle
BrandJ&L
1/2 In. Adaptor
BrandSHEFFIELD
Round File 10"
BrandENDURA
2"NPS Butt Welded Straight Cross
BrandRUNYANG
Full Performance Screw Air Compressor
BrandDENAIR
Rotating Shaft Assembly, P/N: HNJ5.5-02 | Agitator HA-5.5
BrandTSC
1/2 In. Extension Bar
BrandSHEFFIELD
KCP76 Pipe Gas Treatment Compressor
BrandKERUI
3000PSI 1-13/16'' AA Christmas Tree
BrandLIWEN
Straight Cutting Snips
BrandENDURA
Worm Shaft, P/N: TWPX175-10 | Agitator HA-5.5/HA-7.5/HA7.5-2
BrandTSC
2" NPS Pipe Cap
BrandYSDLGJ
1"NPS Butt Welded Equal-diameter Tee
BrandYSDLGJ
Replaceable Urethane Pistons|Sizes in Millimeters|With Piston Bore 42mm
BrandKERUI
Oil Seal of Input Shaft, 65x95x12 | Agitator HA-4
BrandTSC
Suction Pump Accessories-internal Thread Plunger Connector
BrandPYZS