XQ1146YB Well Servicing Power Tong
Brand KING OIL
Certification
Lead Time 30dAYS
Guarantee Period 12months
Source of Supply Jiangsu
Payment Method T/T L/C
XQ114/6YB well servicing power tong is a medium power tong used to for coupling makeup of the sucker rod thread in oil well servicing operation. The power tong has following features: 1. The new type of hydraulic backup and main tong are combined into a combined tong. By operating the manual reversing valve on main tong, the backup tong will be clamped automatically and the tubular column will be released flexibly and reliably. 2. Application of different jaw plates for main tong and backup tong can clamp tubular column and hoop of different specifications. The jaw plate can be conveniently installed and uninstalled. 3. The two gears have great speed change difference and the speed is high under high gear and the torque is large under low gear. 4. The power tong brake mechanism and steering control mechanism are set at the upper part of power tong. They have reliable performance and can be installed, adjusted and maintained conveniently. 5. The suspension main tong and backup tong float below main tong and the backup tong hose is connected with the main tong through connector. The main tong and backup tong can be combined for use and can also be separated for transportation. 6. Torque control system can be set to display, record and control the makeup torque.
Technical Parameters:
1. Applicable range mm (in.): Φ60~114(2 3/8″~4 1/2″); 2. High-gear maximum torque kN.m(Ibf.ft): 1.5(1106); 3. Low-gear maximum torque kN.m(Ibf.ft): 6.0(4425); 4. High-gear maximum speed r/min: 85; 5. Low-gear maximum speed r/min: 20; 6. Power head open end size mm(in.): 118(4.65); 7. Dimensions mm (in.): 850×500×600(33.5×19.7×26); 8. Transfer weight kg (Ib): 260(573); 9. Rated system pressure MPa(Psi): 12(1740); 10. Maximum oil supply volume L/min (gpm): 100(26.42).
Recommendations
Aviation Snips-Left Cut
BrandENDURA
Rigid Vertical Bar Centralizer
BrandSHANGSHAN
3" NPS Pipe Cap
BrandYSDLGJ
2" NPS Pipe Cap
BrandYSDLGJ
Hoisting Tools | “Y” Series Slip Type Casing Elevator|HYC Type 200 STON|3-1/2~7-5/8 IN
BrandRUTONG
Grip Tools | Insert Used for DC-S, DCS-R And DCS-L Drill Collar Slips
BrandRUTONG
Sector Acoustic Logging Instrument
BrandWELL-SUN
1/4"Dr.50L Phillips Bits
BrandENDURA
1/2 In. Adaptor
BrandSHEFFIELD
Cast Steel Lift Check Valve
BrandCD
Half-Round File
BrandENDURA
Straight Cutting Snips
BrandENDURA
Grade T8 DX Shackle
BrandJ&L
Diamond File
BrandENDURA
Full Performance Screw Air Compressor
BrandDENAIR
Suction Pump Accessories-pump Barrel Upper Joint
BrandPYZS
15000PSI 5-1/8 Christmas Tree
BrandLIWEN
Power Tong Accessories | Die, P/N: 01.01-27M | ZQ203-100
BrandRUSHI