Replaceable Urethane Pistons|Sizes in inches|With Piston Bore 1-1/2 in
Brand KERUI
Certification
Lead Time 15days
Guarantee Period 12months
Source of Supply Shandong
Payment Method T/T L/C
PISTON
We provide a wide variety of pistons for mud pump applications, including bonded, urethane, rubber, and replaceable rubber or urethane inserts.
• All bonded and replaceable pistons are available in popular sizes.
REPLACEABLE RUBBER PISTONS
KERUI replaceable pistons are made with nitrile rubber or polyurethane and the piston’s maximum pressure capability is due to this oil, water, and heat resistant material. These pistons are fully interchangeable with most other manufacturers.
KERUI pistons are highly resistant to extrusion wear under the highest pump pressures. Replaceable piston offers maximum resistance to bending and hoop stresses generated by cylinder loads and rod fits, a benefit of their premium forged alloy steel bodies. Rated for all drilling operations up to 5000psi. Available sizes range from 3” through 7 1/2” and series are A, B, K, and L
BONDED TRIPLEX URETHANE PISTONS
KERUI’s bonded urethane pistons is designed for resistance to extrusions and abrasions. And with water cooling it will provide optimum performance in oil base mud and high drilling pressures.
FEATURES
• Rated for all drilling operations up and exceeding 5000psi
• Maximum operating temperature is 170°F
• Extended service life
• High pressure service
HIGH TEMPERATRURE BONDED URETHANE PISTONS ARE AVALICABLE UPON REQUEST
KERUI’s bonded urethane pistons is designed to cover higher temperature and pressure capabilities, Resistant to extrusion and abrasion, and with water cooling this piston will provide optimum performance
FEATURES:
• Rated for all drilling operations up and exceeding 5000psi
• Maximum operating temperature is 200°F
• Extended service life
• High temperature tolerant
• High tolerant to chemical attack.
AVALIABLE MUD PUMP MODELS:
Bomco: F-500, F-800/1000, F-1300/1600, F-1600HL, F-2200HL
HONGHUA: HHF-500, HHF-800, HHF-1000, HHF-1300, HHF-1600, HHF-1600HL, HHF-2200HL, 3NB-1300/1600F, 3NB-1600HL
Rongsheng: RS-F500, RS-F800/1000, RS-F1300/1600
Loadmaster: LSF-500, LSF-800, LSF-1000, LSF-1300, LSF-1600
RG: F-500, F-800, F-1000, F-1300, F-1600
Emsco: F-350, F-500, F-650, F-800, F-1000, FD-1000, FB-1300, FB-1600, FA-1600, FA-1300, FC-1600, FD-1600, FC-2200D-300/500
National: 7-P-50, 8-P-80, 9-P-100, 10-P-130, 12-P-160, 14-P-220, JWS-165-L, JWS-340, JWS-400
Oilwell: 350-PT, A-650P-T, A-850-PT, A-1100-PT, A-1400-PT, A-1700-PT
Ideco: T-500, T-800, T-1000, T-1300, T-1600, MM-450, MM-500-F, MM-600-A, MM-700-F, MM-1000
Gardner Denver: PZ-7, PZ-8, PZ-9, PZ-10, PZ-11TGE, TGF, TGH, PAH-275
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000
Russian Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L,
WEATHERFORD/Ellis Williams: MP-5, MP-8, MP-10, MP-13, MP-16, E-447, E-2200, W446, W440
Drillmec: 7TS-600, 8T-800, 9T1000, 10T-1300, 12T1600, 14T-2200
Upetrom: 3PN-1000, 3PN-1600, 3PN-1300, 3PN-2000
OPI: 30-D, 350-GD, 500-DC, 700-HDL, 1000-HDL
Lewco/Ewco: W-250-C, WH440, W446, W600, WH600, WH770, W1100, WH1312, W1612, W1712, W2000, W2214, W2215
American Block: K800, K1000, K1300, K1600, K2200
Soilmec: 7T500, 7T508, 8T650
TFI: BH-800, F-500, F-800, F-1000, F-1300, F-1600
TSC: WF-400, WF-450, WF-700, WFU-750, WF-1000, WF-1300, WF-1600, WF-2000, WF-2200
Disclaimer:
Kerui is an independent manufacturer of replacement parts. Kerui is neither a licensee, nor is it affiliated with any of the Original Equipment Manufacturers named throughout unless specifically noted. Any names and trademarks used herein are solely for identification purposes and are not intended to cause confusion as to the source of the parts. The OEM’s named throughout do not sponsor, promote, warranty or endorse Kerui’s products. Part number usage is for identification purposes only.
Recommendations
Pumping Unit
BrandZYZJ
Power Tong Accessories | Jaw Assy., Size 5-1/2″, 7″, 9-5/8″, 13-3/8″|TQ340-35
BrandRUSHI
Stuffing Box, Mech. Seal, P/N: TS-22223-01-30 | HCP/HCP-S Series Pump Parts
BrandTSC
Sleeve, Shaft (M.S. Pump), P/N: TS-20943-21 | HCP/HCP-S Series Pump Parts
BrandTSC
Q41F DN15 Class600 Stainless Steel Extension Rod Ball Valve
BrandCD
LH-B Vulkameter
BrandDERRICK
Pick Up Tool
BrandENDURA
Shear Plate, P/N: TS-SP120-02 | HSP Shear Pump Parts
BrandTSC
O-Ring/ Seal, TS-7496-26, TS-7496-253, TS-23444-01-72 | HSP Series Pump Parts
BrandTSC
Q41F DN80 Class300 Stainless Steel Extension Rod Ball Valve
BrandCD
Insulated Plastic Clamp
BrandENDURA
Tape Measure 3.5m
BrandSHEFFIELD
ADAPTOR
BrandENDURA
Float Valve Core|Model"F"|Model"G"
BrandSHUANGJIA
Power Tong Accessories | Griping Cylinder, P/N:01.04.00M |ZQ203-100
BrandRUSHI
Following The DuaL-use Gas Devices, P/N: K24JQ|XSL225.2C
BrandRUSHI
NPS1 1/2 CL300 SW Flange
BrandRUNYANG
Cone Crusher
BrandERUI