Skid-mounted testing winch equipment
Brand sincep
Certification
Lead Time 90days
Guarantee Period 12months
Source of Supply Hebei
Payment Method T/T L/C
The whole skid-mounted winch is of three-compartment and fully enclosed structure, composed of power compartment, operation compartment and winch compartment. The compartment doors are sealed with sealing rubber strips, with good airtight performance. The skid body is off anti-collision frame structure, wrapped with 3 mm-thick steel plate and fitted with steel tube beam, with good anti-impact performance. The anti-collision frame is fitted with hoisting points on the top and equipped with four-leg press-fit hoisting rigging to facilitate transportation. The skid body has a compact inside layout, the system can operate flexibly and reliably and complies with the operating features on offshore platforms. Aluminum embossed sheets are adopted for floor of skid body, which is beautiful, durable and has good corrosion resistance performance. The power system of the skid-mounted winch is set in the power compartment which is coated with sound-absorbent material on its six sides. Cummins EQB180-20 engine (rated power 132KW/2200RPM) is installed in the compartment, which can meet the power demand for cable and steel wire testing operation and engine start-up. In addition, equipment like imported Rexroth hydraulic oil pump, air compressor, fuel box, hydraulic oil box, hydraulic oil cooling system, accumulator and spotlight are also installed in the compartment to provide power and lighting of the whole skid. The six walls of the operation compartment are subjected to the flame retardant polyurethane foaming treatment, wrapped with stainless steel wire drawing board or plastic board. Only stainless decorations are adopted in the compartment, and the inside compartment is thermal insulated, beautiful and resistant to corrosion. The compartment is equipped with manipulation platforms, electric control boxes, overhead air conditioner, worktables, data cabinets, operating seats, variable frequency transformers, lights, etc., and the centralized control of the winch operation is carried out in the compartment. The compartment top can be raised. The winch compartment is equipped with cable winch assembly, winch brake system, hydraulic upper rope arranging system, measurement system, hydraulic motor, explosion-proof lighting and explosion-proof floodlight. Motor drive or engine drive can be adopted according to users' requirements, and logging skid and well testing skid can be made. The entire skid is divided into sub-skid, explosion-proof skid, marine anti-corrosion and explosion-proof skid, etc.
Technical Parameters:
1. Motor/engine power: 24-132 kw; 2. Winch convey mode: variable frequency motor drive, full hydraulic, hydraulic+ machinery, full machinery; 3. Capacity of winch: (Ø12.7 cable): 500 m-7,000 m; 4. Winch speed: 30-6,000 m/hour (logging skid) / 0-10,000 m/hour (well testing skid).
Recommendations
Replaceable Rubber Pistons|Sizes in inches|With Piston Bore 1-5/8 in and 1-1/2 in Bushing
BrandKERUI
FKQ320-5 Remote Control Device of Ground Blowout Preventer
BrandSHENKAI
KS021531 Safety Shoes
BrandKANGSHIELD
3/8" Dr. 6pt Deep Socket
BrandENDURA
(Carbon Steel) No Leakage WaferCheck Valve
BrandCD
4"NPS Butt Welded Straight Cross
BrandRUNYANG
2"NPS Butt Welded Straight Cross
BrandYSDLGJ
Bladder Assy, P/N:AK4535020400 |BOMCO F-500/F-800
BrandKERUI
Power Tong | XQ1146YB Well Servicing Power Tong
BrandKING OIL
8 Tons Cleaning Sweeper Truck
BrandCLW
3/4" Dr. Extention Bar
BrandENDURA
Oil Seal of Input Shaft, 55x80x10 | Agitator HA-5.5/HA-7.5/HA7.5-2
BrandTSC
KS021546-Safety Shoes
BrandKANGSHIELD
1/4"Dr. Double End Bits
BrandENDURA
10Pc Screwdriver Set
BrandSHEFFIELD
Mud Pump Valve Spring
BrandKERUI
15-106RHBC Rod Pump
BrandFUQIAO
Rubber Hammer
BrandENDURA