Three-core Copper 3.6-6KV Cross-linked Polyethylene Insulated Non-magnetic Metal Strip Armored PE Sheathed Power Cable
Brand SHANGSHANG
Certification N/A
Lead Time 15days
Guarantee Period 12months
Source of Supply Jiangsu
Payment Method T/T L/C
Cross-linked PE insulation refers to a process that a chemical method or physical method is used to convert linear structure of PE into three-dimensional network structure, that is, thermoplastic PE is converted to thermoset cross-linked PE, so as to greatly improve its mechanical performance, heat aging resistance, environmental stress resistance and excellent electrical performance. Cross-linked PE insulated cable conductor has a normal operating temperature of 90℃ and has features including simple structure, small outer diameter, light weight, convenient use and no restrictions on laying height difference. It is generally laid overhead, indoors, in tunnels, in cable trenches and pipelines.
Technical Parameters:
1. The product is applicable to medium and high voltage power transmission and distribution system with rated voltage as 3.6/6~26/35kV. 2. The highest rated temperature of cable conductor is 90℃. 3. The highest temperature of short circuited (lasting for maximum 5s) cable conductor shall not exceed 250℃. If the temperature is lower than 0℃, the cable conductor should be preheated first. 4. Minimum bending radius of cable in installation: unarmored single-core cable 20D, unarmored three-core cable 15D, armored single-core cable 15D, armored three-core cable 12D.
Recommendations
3"NPS Butt Welded Equal-diameter Tee
BrandYSDLGJ
Diamond File 5*180mm
BrandENDURA
FKQ320-5 Remote Control Device of Ground Blowout Preventer
BrandSHENKAI
9*12mm Reversible Ratchet Head
BrandENDURA
Suction Pump Accessories-External Thread Plunger Closed Valve Cover
BrandBAOSHI
Three-square File 10"
BrandENDURA
Half-Round File 10"
BrandENDURA
Swan Hook
BrandJ&L
Rotary Cultivator Of Small Sized Gearbox Series
BrandDAHUA
Suction Pump Accessories-valve Cover
BrandBAOSHI
Rotating Shaft Assembly, P/N: HNJ4-02 | Agitator HA-4
BrandTSC
KS021531 Safety Shoes
BrandKANGSHIELD
Suction Pump Accessories-stem Reducer
BrandBAOSHI
Rubber Hammer
BrandENDURA
Replaceable Urethane Pistons|Sizes in Millimeters|With Piston Bore 38.1mm
BrandKERUI
9*12mm Rectangular Open End Fitting
BrandENDURA
Bladder Assy, P/N:AK4535020400 |BOMCO F-500/F-800
BrandKERUI
Oil Seal of Input Shaft, 55x80x10 | Agitator HA-5.5/HA-7.5/HA7.5-2
BrandTSC