2-line guide wave radar material level meter
Brand HENGHE
Certification N/A
The guide wave radar liquid level meter is manufactured with advanced micro-processor and unique EchoDiscovery echo processing technology, aluminum die casting enclosure, and electronic parts are of full rubber sealing structure, and are suitable for complicated operating conditions and continuous material level measurement of explosive-proof flammable media. Mai features: 1. Due to use of advanced micro-processor and unique EchoDiscovery echo processing technology, the guide wave radar material level meter is used for kinds of complicated operating conditions 2. Composition of various process connection methods and detecting assemblies make the guide wave radar liquid level meter suitable for complicated operating conditions and application sites. Such as: high temperature, high pressure, low media and electric constant media 3. Pulse operating mode is adopted, and the guide wave radar material level meter transmission power is low, installed in various metallic and non-metallic containers, harmless to human body and environment.
Technical Parameters:
1. Maximum range: cable: 30m rod: 6m 2. Accuracy: ±10mm 3. Process temperature: 40-150℃ 4. Process pressure: -0.1-4MPa 5. Signal output: 4-20mA/HART 6. Power supply: 2-wire system, 4-wire system
Recommendations
Suction pump accessories-pump barrel coupling
BrandPYZS
20-106RHBC Rod Pump
BrandFUQIAO
Replaceable Rubber Pistons|Sizes in inches|With Piston Bore 1-5/8 in and 1-1/2 in Bushing
BrandKERUI
Oil Seal of Input Shaft, 55x80x10 | Agitator HA-5.5/HA-7.5/HA7.5-2
BrandTSC
Upper/ Lower Impeller Assembly, P/N: HNJ7.5-04, HNJ7.5-07-2 | Agitator HA-7.5/HA7.5-2
BrandTSC
Standard Oil-injected Screw Air Compressor
BrandDENAIR
1/4"Dr.50l Torx Bits
BrandENDURA
1/4"Dr. Double End Bits
BrandENDURA
3/4" Dr. Extention Bar
BrandENDURA
20-125RWBM Rod Pump
BrandFUQIAO
Upper Impeller Assembly, P/N: HNJ5.5-03 | Agitator HA-5.5
BrandTSC
Rubber Hammer
BrandENDURA
Replaceable Urethane Pistons|Sizes in Millimeters|With Piston Bore 38.1mm
BrandKERUI
Suction Pump Accessories-External Thread Plunger Closed Valve Cover
BrandBAOSHI
KS021531 Safety Shoes
BrandKANGSHIELD
Urethane Bonded Pistons|Sizes in Millimeters|With Piston Bore 38.1mm
BrandKERUI
Drilling Line∣6*26WS-IWRC-EEIP-sZ, Lubricated, Uncoated Finish
BrandJ&L
Suction Pump Accessories-valve Cover
BrandPYZS