DHT Stirring Thermostatic Electric Heating Sleeve
Brand ERUI
Certification N/A
DHT stirring thermostatic electric heating sleeve is applicable to the heating of liquids in all laboratories and test rooms in petroleum industry, chemical industry, scientific research, junior college and school, pharmaceutical industry and environmental protection industry. The DHT stirring thermostatic electric heating sleeve consists of three parts: heating system, stirring system and temperature control system. The heating system adopts internal heating mode, where the heating wire is enclosed in the glass fiber, heating produces no open fire and the heating is quick and uniform. The mixing system adopts double pulse integrated circuit, which has no pole speed regulation, starts stable, and the stirrer is not easy to be out of tune. The integrated circuit is adopted for temperature control, especially for the interference of radio waves and external voltage display meters. This model is small, easy to operate, low power consumption, no noise and long service life. It is a necessary tool for the laboratory personnel to seal the resistance wire in the insulating layer and weave a new type of energy saving heater. It has advantages including fast temperature rise, uniform heating, no open fire, energy conservation and use safety. The internal heat heating method is used in the heating part of the DHT stirring thermostatic electric heating sleeve. The temperature can reach 300℃, which solves the defect that the thermostatic magnetic agitator can not reach 100℃. It caters to the different purposes of testing.
Technical Parameters:
1. Power supply voltage: ~220V 50HZ 2. Speed: 1500r/min; 3. High temperature: 300℃; 4. Continuous working hours: 8h 5. Voltage range: 0~210V (continuous and adjustable).
Recommendations
Bow Spring Centralizer
BrandSHANGSHAN
3/8" Dr. 6PT. Socket
BrandENDURA
Three-square File 10"
BrandENDURA
Bladder Assy, P/N:AK4535020400 |BOMCO F-500/F-800
BrandKERUI
Drilling Line∣6*26WS-IWRC-EEIP-sZ, Lubricated, Uncoated Finish
BrandJ&L
KS021552-Safety Shoes
BrandKANGSHIELD
27x36mm Rectangular Ring End Fitting
BrandENDURA
3/4" Dr. Extention Bar
BrandENDURA
Screwdriver Phillips
BrandENDURA
Replaceable Urethane Pistons|Sizes in Millimeters|With Piston Bore 38.1mm
BrandKERUI
9*12mm Rectangular Open End Fitting
BrandENDURA
BOMCO F-500 Mud Pump Fluid End Accessories_Inch
BrandKERUI
12.5mm Universal Joint
BrandENDURA
Suction Pump Accessories-External Thread Plunger Closed Valve Cover
BrandBAOSHI
TSC HMC Series Mud Cleaner | HMC250x2/100x12, HMC250x3/100x16
BrandTSC
(Carbon Steel) No Leakage WaferCheck Valve
BrandCD
Rotating Shaft Assembly, P/N: HNJ7.5-03 | Agitator HA-7.5/HA7.5-2
BrandTSC
Replaceable Rubber Pistons|Sizes in inches|With Piston Bore 1-5/8 in and 1-1/2 in Bushing
BrandKERUI