Product Information

1. Housing of this series of fluorescent lamp is fabricated with extrusion aluminum alloy and die-casting aluminum alloy. Its tensile strength is not lower than 120Mpa and magnesium content is not more than 5% (mass ratio). 2. for emergency fluorescent lamp, a set of emergency device is installed in the lamp. under normal operation condition of external power source, the emergency fluorescent lamp can be used for general lighting and its start/stop is under the control of lighting switch. When internal battery pack of the lamp is in charging state (generally, it can be fully charged after 30h), the lamp can shift to emergency working state within 3s in case of external power failure. at the moment, power of the fluorescent lamp is supplied by battery pack, and one fluorescent tube is lightened. 3. Lamp holder, ballast and emergency device of emergency fluorescent lamp form an entirety, and all wires in the lamp have been connected before delivery. 4. It is convenient to maintain the fluorescent lamp and replace its light source. The transparent shield can be opened by rotating the screwing device. CeY series explosion-proof (emergency) fluorescent lamp (hereinafter referred to as the fluorescent lamp or emergency fluorescent lamp) is designed and manufactured as per the standards in Explosive Atmospheres (GB3836.1~3-2010). It is used in zone 1 and zone 2 in T1~T3 places with explosive gas mixture indoors and outdoors, and it is used for lighting in line of AC 50HZ/60HZ with rated voltage of 220/110V. in case of a sudden power failure, emergency fluorescent lamp can be automatically energized for emergency lighting.

Technical Parameters:

1. Power: 2x40; 2. Voltage: 110/220V; 3. Explosion-proof mark: ExdembⅡBT4 Gb; 4. IP grade: IP66