Brand ERUI
Certification
Lead Time 60days
Guarantee Period 12months
Source of Supply Shandong
Payment Method T/T L/C
Introduction of measurement and adjustment integration technology:
The testing and controlling system adopts the method of allocating while testing to test and allocate the flow. The flow pressure curve is monitored by ground instruments, and the nozzle size of the water injection valve is adjusted according to the real-time monitored flow curve until reaching the preset flow.
Characteristics of integrated testing and controlling technical :
1. Can be used for testing and controlling, sealing examination ;
2. Adopting concentric adjustable water distributor, the number of layers is not limited;
3. Directly reading testing data on the ground, stepless deployment.
Technical principle of integrated testing and controlling meter:
when the testing and controlling meter is put down into the well at a certain distance from the water distributor, turning on the electric positioning device to posi tion the meter to water distributor's positioning catheter, and the radial positioning device and the testing and controlling manipulator are positioned in the corresponding positioning grooves. The manipulator rotation drives the ajusting core to rotate, to control the water injection flow, and then testing the bottom hole data through a three-parameter tester and uploading in real time.
Features of integrated testing and controlling meter:
1. All wells testing and controlling can be realized in one well trip, saving a lot of manpower and material resources;
2. It can adapt to different water distribution technologies such as deep wells and inclined wells;
3. It has obvious effects on improving economic benefits, reducing costs and developing oil fields rationally.
Parameters of integrated testing and controlling meter:
Maximum outer diameter |
φ42mm |
Pressure test range |
60MPa |
Pressure test accuracy |
2~5‰ |
Temperature resistance | 125℃ |
Flow test range | 0~500m³/d |
Flow test accuracy |
1.5% |
Working Voltage | 70V |
Maximum allowable current | 450mA |
Maximum output torque |
250N·m |
Recommendations
Telescopic Inspection Mirror
BrandENDURA
Explosion-proof Floodlight
BrandOKTECH
Insulated Plastic Clamp
BrandENDURA
PA-4073 Baseboard Installation Thermistor and Thermocouple Isolator (Two-in Two-out)
BrandParagon
Shaft, P/N: TS-20612-02-33 | HCP/HCP-S Series Pump Parts
BrandTSC
Spacer, Lower, P/N: RS72.130-11 |SL135 / SL170
BrandRUSHI
Movable external thread-type bimetal thermometer
BrandHENGHE
Copper Single-core Rated Voltage 6/10KV Cross-linked PE Insulated Sheathed Power Cable
BrandWANDA
Pumping Unit
BrandZYZJ
5000PSI BB Tubing Head Housing
BrandLIWEN
FX Series Non-Rotary Stabilizer│HF1000│HF2000│HF3000│HF4000
BrandSHUANGJIA
Following The DuaL-use Gas Devices, P/N: K24JQ|XSL225.2C
BrandRUSHI
TG720L LED Street Lamp
BrandTECHLITE
HHG3810L Direct-stroke Electronic Electric Actuator
BrandHENGHE
ADAPTOR
BrandENDURA
107.37.01.33 Gasket
BrandLS
Inspection Mirror
BrandENDURA
Casing, 6x5-11, P/N: TS-19123-01-30A | HSP Shear Pump Parts
BrandTSC