1.6 MPa FM-LC Series Oval Gear Flowmeter
Brand HENGHE
Certification N/A
FM-LC Series oval flowmeter is one of the world's most popular volumetric flowmeters used to measure the liquid flow rate of pipes under a certain pressure. The device has the advantages of simple structure, high accuracy, reliable use, no special requirements on flow fields in inlet and outlet pipes, and wide viscosity and flow ranges of measured media. It is widely used for flow detection of oil, chemical, pharmaceutical, transportation, food, and other liquids of industrial and commercial sectors.
Technical Parameters:
1. Nominal pressure (MPa) : 1.6, 2.5, 4.0, 6.3; 2. Accuracy class: class 0.5 and 0.2; 3. Medium temperature (℃) : - 40 ~ +50; 4. Nominal diameter (mm): 10-200.
Recommendations
Cast Steel Lift Check Valve
BrandCD
2" NPS Pipe Cap
BrandYSDLGJ
RS78.100-12A Stem
BrandRUSHI
Power Tong | Casing Power Tong|TQ178-16|4~7
BrandRUSHI
Drilling Line∣6*26WS-IWRC-IPS-sZ, Lubricated, Uncoated Finish
BrandJ&L
Corrosion Inhibitor
BrandDFHG
Power Tong | Drill Pipe Power Tong|ZQ216-135II|3-1/2~8-1/2
BrandRUSHI
20-125RWBC Rod Pump
BrandFUQIAO
Pump Accessories-pump Barrel Valve Cover Reducer
BrandBAOSHI
5/16"Dr. 30L Phillips Bits
BrandENDURA
10" Straight Aviation Tin Snip
BrandSHEFFIELD
9.2 Tons Sprinkling Truck
BrandCLW
Drilling Line∣6*19S-IWRC-EEIP-sZ, Lubricated, Uncoated Finish
BrandJ&L
Rigid Vertical Bar Centralizer
BrandSHANGSHAN
Aviation Snips-Left Cut
BrandENDURA
1"NPS Butt Welded Equal-diameter Tee
BrandYSDLGJ
20 Tons Cleaning Sweeper Truck
BrandCLW
Replaceable Urethane Pistons|Sizes in Millimeters|With Piston Bore 42mm
BrandKERUI