Ordinary zirconia analyzer
Brand LANLIANFUJI
Certification N/A
The oxygen analyzer can continuously measure the concentration of chlorine in the industrial boiler and the combustion exhaust gas of various industrial furnaces. It is the best analyzer for the combustion tube to meet and control. The analyzer is connected to a pilot (ZFK8) that is directly inserted into the main flue and introduces the gas to be tested into the detector, and performs detector control, signal processing, display, and external input and output. A converter (ZKM) such as communication is used. The detector and converter are connected by cable.
Technical Parameters:
1. Measurement object\: oxygen in a flammable gas; 2. Measurement method: direct insertion type zirconia measurement system; 3. Measurement range: 0-50 vol% oxygen can be arbitrarily set the measurement range of oxygen; 4. Response time: 90% response 4-7 seconds; 5. Warm-up time: 10 minutes; 6. Analog output: DC4-20mA; 7. Repeatability: within 0.5% FS.
Recommendations
 
                    Casing Hanger 2000psi, 11" X 5--EE
BrandLIWEN
 
                    3000PSI 2-1/16'' FF Christmas Tree
BrandLIWEN
 
                    3000PSI 4-1/16'' HH Christmas Tree
BrandLIWEN
 
                    Round Link Lashing Chain
BrandJ&L
 
                    15000PSI 2-1/16'' Christmas Tree
BrandLIWEN
 
                    Casing Hanger 5000psi, 13-5/8" X 7"-DD
BrandLIWEN
 
                    Casing Hanger 5000psi, 13-5/8" X 7"-EE
BrandLIWEN
 
                    3000PSI 2-1/16'' DD Christmas Tree
BrandLIWEN
 
                    Casing Hanger 5000psi, 13-5/8" X 5-1/2"-HH
BrandLIWEN
 
                    3000PSI 2-9/16'' AA Christmas Tree
BrandLIWEN
 
                    3000PSI EE PCP Wellhead
BrandLIWEN
 
                    Hoisting Tools | DDZ Series Drill Pipe Elevators |DDZ 100 STON|2-3/8~5 IN
BrandRUTONG
 
                    Casing Hanger 2000psi, 11" X 5-1/2"-CC
BrandLIWEN
14” NPS Pipe Cap
BrandRUNYANG
 
                    Three Eccentric Multi-Layer Metal Seal Butterfly Valve With Clamp Connection
BrandCD
 
                    Center Punch
BrandENDURA
 
                    Clutch for Chain
BrandJ&L
 
                    Hoisting Tools | 18° Center Latch Elevator G Series|HGG 500 STON|4~6-5/8 IN
BrandRUTONG