Product Information

HIGH CHROME LINER

The outer section or shell is manufactured from high strength carbon steel and heat-treated to provide optimum mechanical properties. The inner section or sleeve is manufactured from a proprietary high chrome content iron alloy that offers excellent resistance to wear. The high percentage and thorough distribution of chrome carbides in conjunction with controlled heat treatment for maximum metallurgical properties, prior to assembly in the shell, gives a very high degree of uniformity in microstructure and wall section hardness. This results in a sleeve that has excellent abrasion, erosion, and corrosion resistance. The sleeve is manufactured to the bore tolerances specified by API or better to provide longer life by reducing gaps between the liner bore and piston.

Service Life: more than 800 hours

Features/Benefits

Rated for all drilling operations.
Bore hardness is 62-69 Rockwell.
HP lip design to prevent inner sleeve slippage.
Excellent resistance to abrasion, erosion, and corrosion.
Extremely long service life.

Available Mud Pump Models:

Bomco: F-500, F-800/1000, F-1300/1600, F-1600HL, F-2200HL
HONGHUA: HHF-500, HHF-800, HHF-1000, HHF-1300, HHF-1600, HHF-1600HL, HHF-2200HL, 3NB-1300/1600F, 3NB-1600HL
Rongsheng: RS-F500, RS-F800/1000, RS-F1300/1600
Loadmaster: LSF-500, LSF-800, LSF-1000, LSF-1300, LSF-1600
RG: F-500, F-800, F-1000, F-1300, F-1600
Emsco: F-350, F-500, F-650, F-800, F-1000, FD-1000, FB-1300, FB-1600, FA-1600, FA-1300, FC-1600, FD-1600, FC-2200D-300/500
National: 7-P-50, 8-P-80, 9-P-100, 10-P-130, 12-P-160, 14-P-220, JWS-165-L, JWS-340, JWS-400
Oilwell: 350-PT, A-650P-T, A-850-PT, A-1100-PT, A-1400-PT, A-1700-PT
Ideco: T-500, T-800, T-1000, T-1300, T-1600, MM-450, MM-500-F, MM-600-A, MM-700-F, MM-1000
Gardner Denver: PZ-7, PZ-8, PZ-9, PZ-10, PZ-11TGE, TGF, TGH, PAH-275
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000
Russian Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L,
WEATHERFORD/Ellis Williams: MP-5, MP-8, MP-10, MP-13, MP-16, E-447, E-2200, W446, W440
Drillmec: 7TS-600, 8T-800, 9T1000, 10T-1300, 12T1600, 14T-2200
Upetrom: 3PN-1000, 3PN-1600, 3PN-1300, 3PN-2000
OPI: 30-D, 350-GD, 500-DC, 700-HDL, 1000-HDL
Lewco/Ewco: W-250-C, WH440, W446, W600, WH600, WH770, W1100, WH1312, W1612, W1712, W2000, W2214, W2215
American Block: K800, K1000, K1300, K1600, K2200
Soilmec: 7T500, 7T508, 8T650
TFI: BH-800, F-500, F-800, F-1000, F-1300, F-1600
TSC: WF-400, WF-450, WF-700, WFU-750, WF-1000, WF-1300, WF-1600, WF-2000, WF-2200

Disclaimer:
Kerui is an independent manufacturer of replacement parts. Kerui is neither a licensee nor is it affiliated with any of the Original Equipment Manufacturers named throughout unless specifically noted. Any names and trademarks used herein are solely for identification purposes and are not intended to cause confusion as to the source of the parts. The OEM’s named throughout do not sponsor, promote, warranty or endorse Kerui’s products. Part number usage is for identification purposes only.